PRODUCT

MONORAIL HOIST

As the hoist moves along a certain course, it is mainly used for towing and transporting fixed object, and is used for maintenance and repair of motor, fan, and others, Many has the hoist suspended to the flange under ' I section steel(commonly, it installed and assembled to the ceiling of factory, warehouse, etc)'. Some have the perated through the press butto switch or pulled by hand.

OVER HEAD CRANE

It is the crane moving along the rail installed at a certain interval on both sides of wall, and is called the ceiling crane because it is installed near the factor, warehouse or ceiling. Even the crane which moves along the rail installed outdoors is also called the ceiling crane if it has the same structure.

SUSPENSION CRANE

It is crane that moves along the driving beam installed on the ceilig of building, and has the weaknessthat the load of crane is concentrated on the ceiling, through it is effective in securing the space of building.

GANTRY CRANE

It is the crane that moves along the rail installed on the floor to install the crane at the place where there is no building, and does not require separate architectural structure. Depending on cases, it is called SEMI-GANTRY CRANE if it moves along the beam installed at the corner of the building.

JIB CRANE

It has the pillar type for installing the separate column and the wall attachment type using the wall in the building. BOOM(JIB,ARM)rotates, enabling the performance work within a certain section. The boom protruding horizontal-lyor the sloping at the supportingpoint, which is the crane with JIB, is called JIB crane, and is the second most used one after the ceiling crane, and has many different types.

WALL CRANE

It is the JIB Crane that moves along the driving beam installed at the wall of building. The difference from the JIB crane is that the entire crane is driven. Generally, it is installed right under the ceiling crane in the factory, and is installed for the ceiling crane and separate abcillary work purpose.

AIR HOIST CRANE

It is the hoist which uses the compressed air, easy to adjust the speed and has low defect rate, and therefore, requires little cost of maintenance. It does not use the electricity and has high blast resistance and flame resistance, increasing the safety.